2015 Generac MD400

Call for Price


Availability
Brochure
Year
2015
Manufacturer
Generac
Model
MD400

Overview

Description

Generac’s MPS is an integrated approach to generator paralleling, and is cost competitive with large single gensets and traditional paralleling systems. Advantages are redundancy, flexibility and scalability in a modular type paralleling system.

Engine
  • Air Induction System: Turbocharged/Aftercooled
  • Alternator: (Standard Model) 520 mm Generac ; (Poles) 4 ; (Field Type) Revolving ; (Insulation Class - Rotor) H ; (Insulation Class - Stator) H ; (Total Harmonic Distortion) <5% ; (Telephone Interference Factor) <50 ; (Standard Excitation) Permanent Magnet ; (Bearings) Single Sealed Cartridge ; (Coupling) Direct, Flexible Disc ; (Load Capacity - Standby) 100% ; (Prototype Short Circuit Test) Yes ; (Voltage Regulator Type) Digital ; (# of Sensed Phases) All ; (Steady State Regulation Accuracy) +/- 1%
  • Bore x Stroke: 130 x 157 mm / 5.12 x 6.18 in
  • Compression Ratio: 16.3:1
  • Coolant Heater: 1500 Watts / 120VAC
  • Cooling System: Closed Recovery
  • Crankcase: (Capacity) 38 L / 40.15 qts
  • Crankshaft: Dropped Forged Steel
  • Cylinder Head: 4-Valve
  • Cylinders: 6
  • Displacement: 12.5 L
  • Electrical System: (Voltage) 24VDC ; (Battery Charging Alternator) Std ; (Battery Size @ 0ºC) 1155 CCA ; (Battery Group) 8D ; (Battery Voltage) (2) 12VDC ; (Ground Polarity) Negative
  • Emission: (EPA Compliance) Stationary Emergency
  • Fan: (Type) Pusher ; (Speed - rpm) 1656 ; (Diameter) 927 mm / 36.5 in
  • Fuel System: (Type) Ultra Low Sulfur Diesel #2 ; (Specifications) ASTM ; (Filtering Microns) Primary 10 - Secondary 2 ; (Inject Pump Make) Electronic ; (Pump Type) Engine Driven Gear ; (Injector Type) MEUI ; (Engine Type) Pre-Combustion ; (Supply Line) 12.7 mm / ½ in NPT ; (Return Line) 12.7 mm / ½ in NPT
  • Governor: Electronic Isochronous ; (Steady State Frequency Regulation) +/- 0.25%
  • Make: Perkins
  • Oil Filter: Full-Flow
  • Oil Pump: Gear
  • Pistons: Aluminum
  • Type: In-Line
  • Water Pump: (Flow) Pre - Lubed, Self Sealing
Features
  • Alternator - ; Two-Thirds Pitch ; Layer Wound Rotor & Stator ; Class H Materials ; Digital 3-Phase Voltage Control
  • Controls - ; Encapsulated Board W/ Sealed Harness ; 4-20mA Voltage-To-Current Sensors ; Surface-Mount Technology ; Advanced Diagnostics & Communications
  • Engine - ; EPA Compliant ; Industrial Tested, Generac Approved ; Power-Matched Output ; Industrial Grade
  • Generator Set - ; Prototype & Torsionally Tested ; UL2200 Tested ; Rhinocoat Paint System ; Wide Range Of Enclosures And Tanks

Specs

Engine

Displacement
12.5 L

Related Products